以下程序是关于有效数据之后插入冗余数据，输入输出均遵循AXI-strem协议，我一共插入了7个数据，为啥仿真的时候，插入的冗余数据就显示一个，不该是显示7个相同的数据吗？求各位大侠指点下，谢啦
`timescale 1ns / 1ps
//////////////////////////////////////////////////////////////////////////////////
// Company:
// Engineer:
//
// Create Date: 2017/04/26 16:33:58
// Design Name:
// Module Name: dummy_insert
// Project Name:
// Target Devices:
// Tool Versions:
// Description:
//
// Dependencies:
//
// Revision:
// Revision 0.01 - File Created
// Additional Comments:
//
//////////////////////////////////////////////////////////////////////////////////

//端口声明
module dummy_insert(
clk,
rstn,
s_data_tvalid,
s_data_tdata,
s_data_tready,
s_data_tlast,
m_data_tvalid,
m_data_tdata,
m_data_tready,
m_data_tlast
    );

  parameter INSERT_NUM = 7;  
  parameter DUMMY_DATA = 4'b1001;
//input and output
input          clk;
input          rstn;
input          s_data_tvalid;
input[3:0]     s_data_tdata;
output         s_data_tready;
input          s_data_tlast;
output         m_data_tvalid;
output[3:0]    m_data_tdata;
input          m_data_tready;
output         m_data_tlast;

//插入冗余数据选择标志信号
reg dummy_sel;
always @(posedge clk)
begin
    if(rstn == 1'b0) begin
        dummy_sel <= 1'b0;
    end
    else if(s_data_tlast) begin
        dummy_sel <= 1'b1;
    end
    else if(m_data_tlast) begin
        dummy_sel <= 1'b0;
    end
end

//m_data_tvalid（整个传输时间）
reg m_data_tvalid_t;
reg m_data_tvalid_insert;
wire  m_data_tvalid;

//有效数据传输
always @(posedge clk)
begin
    if(rstn == 1'b0) begin
        m_data_tvalid_t <= 1'b0;
    end
    else begin
        m_data_tvalid_t <= s_data_tvalid;
    end
end

//冗余数据传输
always @(posedge clk)
begin
    if(rstn == 1'b0) begin
        m_data_tvalid_insert <= 1'b0;
    end
    else begin
        m_data_tvalid_insert <=  dummy_sel & m_data_tready & s_data_tvalid;
    end
end

assign m_data_tvalid = m_data_tvalid_t | m_data_tvalid_insert;

//m_data_tlast
reg [2:0] cnt_dummy;
always @(posedge clk)
begin
    if(rstn==1'b0 || s_data_tlast == 1'b1) begin
        cnt_dummy <= 2'd0;
    end
    else if(cnt_dummy < INSERT_NUM && dummy_sel && m_data_tready ) begin
        cnt_dummy <= cnt_dummy + 1'b1;
    end
end

assign m_data_tlast = (cnt_dummy == INSERT_NUM-1) & m_data_tready;

//m_data_tdata
reg [3:0] m_data_tdata_t;
always @(posedge clk)
begin
    if(s_data_tvalid & s_data_tready) begin//有效数据传输
         m_data_tdata_t <= s_data_tdata;
    end
    else if(m_data_tvalid_insert) begin
        m_data_tdata_t <= DUMMY_DATA;//冗余数据传输
    end
end

assign m_data_tdata = m_data_tdata_t;

//s_data_tready
assign s_data_tready = (~dummy_sel) & m_data_tready;//传有效数据时 为高电平
endmodule